Adjusting the COM Port Settings The COM Port Settings will need to be adjusted in order to communicate with your Motorola Radius.
Dosbox Usb Serial Adapter How To Accomplish ThisIt took me about a week to figure out how to accomplish this dreadful task.Lets jump right in and start programming your Motorola Radius series (GM300GR300M10M120M130) radio Cables Required to Program the Motorola Radius The cables and connectors required to program your Motorola Radius will vary from computer to computer. If you have a newer model computer, chances are that you do not have a serial port. If you have an older model computer, you are probably in luck. To see if you have a serial port on your computer, look at the connections for a port labeled Serial. If you do have a serial port, you do not need to purchase the USB Serial Port Adapter listed below. Recommended Cables Connectors Listed below are the recommended programming cables and connectors required to program the Motorola Radius. I have received a few conformations from others that they do work as expected. It is best to use the recommended cables and connectors listed above. WARNING Some cheap USB serial port adapters do not work to program your Motorola Radius. I had to trash two different USB serial port adapters before I found one that worked for me. Getting Setup to Program the Motorola Radius The first thing you need to do is get your hardware setup. Finally, attach the programming cable to the RIB and your transceiver. Note: If you have an existing serial port on your computer, just plug your Motorola RIB to the computer and the Motorola programming cable to the RIB and your transceiver. We now need to make sure that the USB Serial Port Adapter has been assigned port COM1 or COM2. The Device Manager can be accessed by bringing up the Start Menu and typing Device Manager in the Search Programs and Files area. How to Change the COM Port Number If you plugged in your USB Serial Port Adapter and a COM port other then COM1 or COM2 was assigned in the Device Manager, follow the steps below. Step 2 - (Changing the COM Port Number) Right click on the USB Serial Port and select Properties. Step 3 - (Changing the COM Port Number) Click the Port Settings tab, and then select the button labeled Advanced. Step 4 - (Changing the COM Port Number) Click the drop-down menu from where it says COM Port Number and select COM1 or COM2. Note: If COM1 and COM2 are both in use, you must select one of them. It will give you a warning that the port was opened by another application, and may have an unpredictable effect (on the other application).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |